Queen Rearing Starter Kit

Love the concept and product.. Wish I had more of them..

Two major things noticed that need to be fixed immediately: 1 - The bottom board should be designed to protect for water dripping in on the front and back of the box. 2 - Should have cut on the edges cover so it fit securely into place to prevent any opening from the divider due to wood bending and so on. *It will be nice to have the telescope cover included with in the kit. * It will be better if the entrance holes are drilled side way, so the front is lower to prevent heavy rain of penetrating the holes into the box. * When creating the bottom board, it will be better off to be without extra edges shown on the front of back. no need to, it will be better off if smooth and lining with the sides of the box edges. So water and snow do not hold on to front and back or the kit which help water leaking into unit. If you have any questions you can reach to me.

I was very disappointed, the wood is the lowest quality with many cracks and 6 inch knots. The dividers were warped and left 1/2 inch gaps at the top. The queen frame was made up from other frames that were broken apart. This was evident as large globs of glue were still on the pieces and there was no way they would fit in the slots. The vertical slot boards were stapled with large gaps that made it impossible to insert the vertical rails, and the queen marking pen was from last year.